Watch This Guy Spray-Paint His Apple Watch to Make It Gold

1 minute read

The gold Apple Watch, like the one Beyoncé was recently seen wearing, probably costs more than you’re willing to spend. Casey Neistat, a filmmaker and YouTube star, had the same thought. So instead of buying one that way, he got a little creative.

Neistat found some gold spray paint, took the straps off the watch then taped off its face and back. Then, he carefully sprayed on both sides. Afterward, when he took the tape off and put the straps back on, the difference didn’t seem too noticeable from the real thing. But perhaps he shouldn’t show it off to jewelry experts; they’re likely to see something’s not quite right.

See What's Inside the Apple Watch

The display is carefully removed, revealing the innards of the Apple Watch iFixit
A plastic tool is used to remove the device’s battery. The Apple Watch sports a 3.8 V, 0.78 Wh lithium-ion battery, which has a life of about 18 hours for general use before needing a recharge iFixit
The Taptic Engine is the tiny motor that provides force feedback whenever the watchface is pressed or when the user receives a notification. Here, we see that it is attached to the Apple Watch’s speaker iFixit
The antenna assembly is removed, which likely controls the watch’s Wi-Fi and Bluetooth functionality iFixit
Removing the digital crown bracket is the final step before having access to the Apple Watch’s integrated computer chip, the S1iFixit
Deep in the Apple Watch’s casing is the S1, the integrated computer chip that gives the device its smarts. It’s extremely difficult to removeiFixit
At the bottom of the watch case lies the plethysmograph that serves as the Apple Watch’s heart rate monitor. The device may also be able to measure a user’s blood oxygen level, but Apple hasn’t promoted this feature, possibly due to FDA regulations iFixit
The separate components of the Apple WatchiFixit

More Must-Reads From TIME

Write to Justin Worland at justin.worland@time.com